58mm Chrome Badges

Simply pick the size of your badge and choose the quantity you'd like. It's as easy as that...

Preparing Your Artwork for Badge Printing

Want your badges to come out looking proper? Here’s what we need from you when you send over your artwork:

1. Size it right

Set your file to the exact finished size of your sticker (e.g. 5.8cm x 5.8cm).

2. Resolution

Go with 300 DPI. Anything lower will look soft or pixelated once printed.

3. Colour mode

Work in CMYK. RGB is for screens, not print, so colours won’t match properly otherwise.

4. Bleed

Add at least 3mm bleed on all sides. This stops any unwanted white edges after trimming.

5. Safe zone

Keep text, logos and anything important at least 3mm inside the cut line, so nothing gets chopped off.

6. Fonts

Convert all text to outlines/curves. That way we don’t need your font files.

7. File formats

We accept:

Vector files (AI, PDF, EPS) – best for logos and graphics

High-res raster files (PSD, TIFF, JPEG, PNG with transparency) – good for photos or detailed designs

8. Double check before sending

Make sure:

- Spelling is correct

- Colours are in CMYK

- Images still look sharp when zoomed in

9. Sending files

Send us a PDF, AI, or EPS with fonts outlined and layers intact. For simpler shapes, a high-res PNG works too.

Good to know:

Each order includes up to 5 different artworks as standard. If you need more than that, you’ll need to place an extra order.

Want your colours to come out solid and bold? Add a white base under those parts of the design.

Want the material to show through for a transparent or shiny effect? Leave the white layer off and the ink will print straight onto the sticker material.

Think of the white layer as a base coat. Add it where you need opacity, skip it where you want the effect to shine through.

1. Decide on the finish

- Solid and opaque = add white.
- Transparent/effect showing = no white.

2. Create a new layer

- Call it “White Layer”.
- Put it just below your artwork layer.

3. Mark the areas

- Fill the shapes where you want white with a solid colour.
- Set it as a spot colour named “White.”

4. Check it over

- With white = bold, opaque colour.
- Without white = see-through or material showing.

5. Save and send

- Export with the white layer intact (AI, PDF, or EPS recommended).

Standard turnaround:

3 to 5 working days from when I receive your final artwork.

Working to a deadline?

Email me at Jay@tackyandupsetting.com before placing your order. That way I can confirm if it’s doable and avoid any mix-ups.

Need a specific delivery estimate?

Just get in touch, I’ll always do my best to work to your timeline.

What are 58mm Chrome Badges?

Custom 58mm Chrome Badges are big, bold and made to shine. Printed in full colour on a metallic silver base, they give your artwork a clean, mirror-like finish that catches the light and attention. Each badge is lightweight but tough, with a secure pin back that clips easily onto clothes, bags or jackets. Ideal for bands, brands, campaigns or events, 58mm chrome badges make a statement and look solid doing it.

They’re about 2.25 inches, large enough to stand out and show off your design.

Yes. Upload your artwork when ordering and we’ll print it in full colour on the chrome base.

The metallic silver base reflects light, giving your design a polished mirror-like effect.

Yes, we print in full colour, and the chrome surface enhances the artwork with a metallic look.

Each badge comes with a sturdy metal pin back that easily clips to clothes, hats or bags.

They’re great for branding, events, merch, giveaways or personal collections.